ROYAL GAZETTE DOCUMENTS
Criteria for Certification of Good Agricultural and Collection Practices for Medical Cannabis in Thailand (Thailand Guidelines on Good Agricultural and Collection Practices (GACP) for Medical Plants).
1. Scope: Criteria and requirements for assessing and certifying compliance with Good Agricultural and Collection Practices for medical cannabis in Thailand.
2. Requirements: Every requirement specified in the Good Agricultural and Collection Practices standard for medical cannabis in Thailand is classified as a “major requirement” that must be complied with; any non-conformity directly or severely affects the quality and safety of cannabis raw material for medical use.
3. Decision Criteria: The certified operator’s practices must conform to all requirements under the Good Agricultural and Collection Practices standard for medical cannabis in Thailand.
Table 1: Requirement Levels — 1. Quality Assurance:
1.1 Maintain production control measures at every step so that produce is of high quality, safe, and conforms to trading partner specifications.
2. Personal Hygiene:
2.1 Personnel must have knowledge of cannabis botany, production inputs, cultivation, harvesting, processing, and storage of cannabis herbal raw material.
2.2 Post-harvest and processing personnel must have sufficient operational knowledge to prevent deterioration of cannabis herbal raw material.
2.3 Personnel must wear attire appropriate to the work area, wear no jewellery, watches, or other accessories while working, and maintain personal hygiene.
2.4 Personnel must wash hands every time before starting work, after using the toilet, or after touching hazardous materials.
2.5 Smoking and eating are prohibited in work areas, and personnel must not perform any act that causes contamination or loss of quality in cannabis herbal raw material.
2.6 Personnel should receive welfare care, necessary workplace facilities, and an annual health examination.
2.7 Employment of personnel must comply with labour law.
2.8 Personnel must have adequate personal protective equipment to prevent hazards from contact with irritants or allergens during cannabis raw material production.
2.9 Personnel handling organic substances, biological products, and fertilisers must be trained and wear appropriate protective gear.
2.10 Personnel who are ill or suspected of having an illness are not permitted to work.
2.11 Personnel with open wounds or skin lesions of any kind should be relieved from duty or wear full protective coverings to prevent contamination of produce or herbal raw material.
2.12 External visitors entering the cannabis production area must comply with the producer’s hygiene rules and regulations.
3. Documentation:
3.1 Maintain Standard Operating Procedures (SOPs) covering every step of production, harvesting, and primary processing to preserve the quality of cannabis herbal raw material.
3.2 Maintain records of prior land-use history and pest outbreaks going back at least 2 years.
3.3 Record every production activity, specifying the activity performed, date, and operator name each time in accordance with the SOP.
3.4 Maintain records of production inputs, their sources, and specific input details.
3.5 Record environmental conditions that affect the quality and safety of cannabis herbal raw material.
3.6 Record every application of organic substances and biological products in the cultivation plot, specifying type, purpose, date of use, rate and method of application, and operator name.
3.7 Cannabis herbal raw material in storage, transit, or packaged for sale must carry batch/lot identification and a code or mark showing the production source and harvest date to enable traceability back to origin.
3.8 Retain all documents executed between producers, processors, buyers, and distributors.
3.9 Retain all internal and external audit reports as well as all complaints from trading partners.
3.10 Review operations, records, and complaints at least once a year to verify production processes and improve procedures, and retain records of reviews and corrective actions as evidence.
3.11 Retain operational records, complaints, and corrective-action records as evidence for at least 2 years.
4. Equipment:
4.1 Equipment, containers, and materials in direct contact with cannabis must be clean and non-contaminating.
4.2 All tools and equipment used in producing cannabis herbal raw material must be corrosion-resistant, easy to clean, and made of non-toxic materials that do not alter the odour, taste, or other essential properties of cannabis raw material.
4.3 All tools and equipment should be designed and constructed to prevent injury to personnel, prevent contamination of cannabis, and allow easy cleaning and inspection.
4.4 Agricultural tools and equipment requiring precision must be inspected and, if inaccurate, repaired, adjusted, or replaced to meet standard performance at least once a year.
4.5 Waste containers must be leak-proof, easy to clean, and have tight-fitting lids.
4.6 Waste bins must be clearly labelled, never used in production processes, and emptied daily.
5. Site:
5.1 Cultivation sites and growing media must be free from heavy metals, chemical residues, pathogenic microorganisms, and other adulterants that affect the safety of cannabis herbal raw material.
5.2 Collect soil and growing-media samples for laboratory analysis of toxic residues and heavy metals at least once before cultivation.
6. Water:
6.1 Collect water samples for laboratory analysis of toxic residues and heavy metals at least once before cultivation.
6.2 Use irrigation methods suitable for the environment and the needs of the cannabis plant.
6.3 Treated wastewater is not permitted for use in cannabis production.
7. Fertiliser:
7.1 Use only legally registered fertilisers.
7.2 Apply fertilisers appropriately according to the needs of the cannabis plant and without adverse environmental impact.
7.3 Manage fertiliser application properly to prevent microbial, chemical, and physical contamination of produce at levels unsafe for consumption or harmful to herbal raw material quality.
7.4 Human waste/excreta must not be used as fertiliser.
7.5 If farmers produce organic fertiliser on-farm, it must undergo complete fermentation or decomposition, with records of raw-material sources and production methods.
7.6 Areas for storing, mixing, and handling fertilisers—or for composting organic fertiliser—must be segregated and located so as not to contaminate cannabis cultivation areas or water sources.
8. Seed and Propagation Material:
8.1 Cannabis seeds and propagation material must be of good quality, pest-free, and true to the declared cultivar/strain.
8.2 The origin of cannabis seeds and propagation material must be traceable.
8.3 Maintain controls to prevent admixture of different cannabis species or strains during production.
9. Cultivation:
9.1 Maintain production controls at each step so as not to adversely affect produce safety and quality, the environment, or the health and safety of producers, consumers, and the community.
9.2 Cultivate cannabis using conservation-agriculture principles that are friendly to the environment, the local community, and society.
9.3 Use an appropriate Integrated Pest Management (IPM) system and do not use chemical pesticides for pest control.
9.4 Beneficial organic substances or plant growth enhancers should be used at appropriate levels with minimal impact on the cannabis plant.
9.5 Only organic substances or biological products are permitted for pest prevention and control, in compliance with the law.
9.6 It is prohibited to use or possess agricultural hazardous substances banned from production, import, export, or possession under the Hazardous Substances Act B.E. 2535 (1992) and its amendments, except permitted organic substances or biological products.
9.7 Select proper spraying equipment, tools, and application methods, and verify that sprayers are in effective working order.
9.8 Clean spraying equipment and tools after every use and dispose of rinse water in a way that does not contaminate the environment.
9.9 Store different organic substances and biological products separately in a dedicated storage area to prevent cross-contamination, control dispensing, avoid contaminating produce, and prevent harm to personnel.
10. Harvesting:
10.1 Different parts of the cannabis plant should be harvested at the optimal stage so that cannabis herbal raw material achieves the highest quality.
10.2 Harvest under suitable weather conditions, avoiding dew, rain, or high humidity.
10.3 Substandard cannabis raw material must be inspected and discarded both during and after harvest to prevent mould and loss of quality.
10.4 During harvesting, there must be no contamination or admixture from foreign matter, weeds, or toxic plants.
10.5 Prevent contamination from hazardous objects or substances during field collection, and do not place harvested produce in direct contact with the ground.
10.6 Do not stack cannabis raw material tightly on top of itself, and avoid mechanical damage after harvest.
10.7 Keep harvesting tools and equipment clean to reduce damage and contamination and preserve raw material quality.
10.8 Harvesting personnel must maintain cleanliness and readiness to reduce damage and contamination and preserve raw material quality.
10.9 Containers for harvested cannabis raw material must be clean and free from foreign matter and residues from previous harvests.
10.10 Maintain measures to protect harvested cannabis produce from contamination by animals and disease vectors.
10.11 Transport harvested produce carefully and immediately to the collection point, with measures preventing moisture uptake during transport.
10.12 Maintain measures during transport to prevent adulteration or contamination by heavy metals, chemical residues, pathogenic microorganisms, or other contaminants affecting safety.
11. Primary Processing:
11.1 Upon arrival of freshly harvested cannabis raw material at the processing facility, promptly transfer it into light- and moisture-protective containers and store it in an appropriate area to prevent heat degradation and microbial growth.
11.2 Where fresh cannabis raw material is processed into dried cannabis, promptly dry it in an appropriate facility upon arrival to prevent heat degradation and microbial growth.
11.3 Processed cannabis raw material should be stored in a facility with appropriate temperature and humidity controls to minimise damage.
11.4 Moisture-reduction measures must effectively prevent loss of quality and contamination.
11.5 Field-harvested cannabis raw material must undergo inspection and sorting.
11.6 During primary processing, cannabis raw material must be inspected to remove substandard material, adulterants, and foreign objects.
11.7 Field-harvested cannabis parts must be cleaned appropriately for the production process.
11.8 Maintain appropriate primary processing measures complying with national, regional, and trading-partner standards.
11.9 At every step of primary processing, maintain controls against contamination and spoilage, and ensure no disease vectors or pests are present.
11.10 Any special processing method that may affect safety (such as irradiation) must be declared and specified, carried out by qualified personnel, and comply with the requirements of the country of origin and trading partners.
12. Building (Harvesting and Primary Processing Facility):
12.1 Primary processing buildings must be situated free from foul odours, smoke, fire, dust, or contaminants, and must not be in flood-prone areas.
12.2 Primary processing buildings must be sturdy, easy to clean, capable of blocking sunlight, external contamination, vectors, and pests, and equipped with temperature, humidity, and ventilation controls.
12.3 Building materials must not cause cross-contamination with cannabis herbal raw material.
12.4 Interior structures and fixtures in primary processing areas must be made of durable, easy-to-maintain, easy-to-clean and sanitise, non-toxic materials that do not react with cannabis raw material or cause cross-contamination.
12.5 Segregate areas with different levels of hygiene control to prevent cross-contamination.
12.6 Provide appropriate sanitising equipment and necessary cleaning and disinfection supplies.
12.7 Provide adequate, hygienically designed handwashing sinks and changing rooms with necessary supplies.
12.8 Water used in primary processing must be clean, suitably treated for the process, and sufficient; water storage and supply equipment must prevent contamination.
12.9 Primary processing wastewater systems must be effective, have no adverse environmental impact, and prevent contamination of water used in cultivation plots.
12.10 Workplace lighting must be adequate and appropriate, and overhead light fixtures must have protective covers to ensure shattered bulbs cannot contaminate cannabis raw material.
13. Packaging and Labelling:
13.1 Primary-processed cannabis raw material should be appropriately packaged as soon as possible to protect against degradation from light, temperature, humidity, and contamination.
13.2 Maintain continuous quality inspection from processing through packaging.
13.3 Tools, equipment, and packaging containers for processed cannabis raw material must be suitable, intact, clean, dry, non-reactive with the raw material, and consistent with the SOP.
13.4 Any reused packaging containers must be clean and free from contamination or adulteration.
13.5 Packaging containers must be stored in a clean, dry area free from vectors, pests, and contamination sources.
13.6 Labels affixed to containers must be clear and state the scientific name, plant part, origin, producer name, batch/lot number, harvest date, production date, quantity, and any other information required by trading partners and destination countries.
14. Storage and Distribution:
14.1 Transport equipment for packaged cannabis raw material must be clean and capable of protecting against light, temperature, humidity, and contamination.
14.2 Packaged cannabis raw material must be stored in dry, well-ventilated conditions.
14.3 Storage rooms for cannabis raw material must be clean and equipped with controls for light, temperature, humidity, and contamination prevention.
This has not been officially translated. For the exact official text, please refer to the PDF. This is as accurate as possible from our team.
